
Looking for a new 7ft Christmas tree for your home this year? We’ve chosen seven artificial trees for different rooms and decorating styles, from full green centrepieces to slim shapes and a pre-lit option.
For a classic, full green 7ft tree, start with the HOMCOM moulded-tip spruce. If your floor space is the real constraint, the Christow pencil gives you the same height in a much narrower shape. Seven feet tells you surprisingly little about how a tree will live in your room; the seven picks below range from a slim 55cm stated diameter to a broad 150cm.
These are exact UK variants we checked for current availability, but we have not assembled, measured or hands-on tested them. Widths and tip counts are retailer-stated, and branch shaping can change the finished spread. If you are still deciding on a height, see our broader artificial-tree guide.
Our top 7 picks

Best full-looking unlit tree
A generous, green spruce shape with 3,116 seller-counted tips and a metal stand.

Best traditional PVC tree
A straightforward green PVC tree if you prefer to choose your own lights and decorations.

Best wide mixed-tip tree
A broad, natural-looking PE/PVC tree for a room that can give it proper space.

Best natural-style unlit tree
An undecorated 7ft spruce with a traditional shape, ready for your own lights.

Best with built-in lights
Christow pre-lit Nordmann Fir 7ft
A 7ft mixed-tip tree with built-in lights, modes and a timer.
Compare the 7ft trees
| Tree | Best for | Stated height | Stated width | Foliage | Lights / setup |
|---|---|---|---|---|---|
| HOMCOM moulded-tip spruce 7ft | full-looking unlit tree | 210cm | About 130cm | Moulded-look outer foliage | Unlit; Hinged |
| Yaheetech hinged spruce 7ft | traditional PVC tree | 219cm | About 128cm listed item width | PVC | Unlit; Hinged |
| Everlands Grandis Fir 7ft | wide mixed-tip tree | 210cm | 150cm stated maximum diameter | PE/PVC mix | Unlit; Hinged |
| Cox & Cox Bergen Spruce 7ft | natural-style unlit tree | 220cm | 140cm retailer-stated diameter | Needle material not specified | Unlit; Hinged |
| Christow pencil spruce 7ft | pencil footprint | 210cm | 55cm stated diameter | Dual-toned artificial needles | Unlit; Pre-attached branches |
| Yukon Snow Pine 7ft | frosted look | 210cm | About 125cm | Snow-flocked PVC | Unlit; Wrapped branches |
| Christow pre-lit Nordmann Fir 7ft | with built-in lights | 210cm | 132cm stated diameter | PE/PVC mix | 350 dual-colour LEDs; Hinged |
On a phone, swipe across the table. Heights and widths are retailer-stated, not our own measurements. Cox & Cox calls 220cm its total height and lists the stand separately; the other listings do not clearly say whether their heights include the supplied stand. If ceiling clearance is tight, confirm with the seller before buying. Specifications and availability checked 14 October 2026.
A closer look at each tree
Best full-looking unlit tree
1. HOMCOM moulded-tip spruce 7ft
If moulded foliage is your priority but you want to choose your own lights, the HOMCOM is a good starting point. It has injection-moulded leaves, hinged branches and a seller-stated size of 210cm high by 130cm wide. That is 20cm narrower than the Grandis Fir on the listed diameters, but it still needs a roomy spot. The maker allows 45–60 minutes for shaping; hinged does not mean ready to decorate straight from the box.

Choose it if: you have room for a full green tree and want to add your own lights.
Skip it if: you need a narrow footprint or built-in lighting.
Best traditional PVC tree
2. Yaheetech hinged spruce 7ft
The Yaheetech suits someone who likes a traditional PVC tree with space to hang their own lights and baubles. It is listed at 219cm high, 9cm taller than the five 210cm picks, and Amazon gives an item width of about 128cm; the spread after shaping is not confirmed. Hinged branches remove the job of matching loose pieces, but the PVC tips will not give the same moulded close-up detail as HOMCOM’s foliage or the Grandis Fir’s PE/PVC mix. Check your ceiling before choosing it.

Choose it if: you like a traditional artificial-tree look and want a simple unlit base.
Skip it if: your priority is moulded, close-up needle detail.
Best wide mixed-tip tree
3. Everlands Grandis Fir 7ft
Choose the Grandis Fir if a broad, natural-looking green tree is the aim and you have the floor space. Its seller-stated 150cm maximum diameter is the widest here, 20cm broader than the HOMCOM, and its PE/PVC foliage offers a different close-up texture from the all-PVC Yaheetech. The unlit, three-section tree has hinged branches and a metal stand. It is not the one to squeeze beside a walkway; leave room to open the branches fully.

Choose it if: you can accommodate a notably wide 7ft tree and like a mixed-tip, natural profile.
Skip it if: you need to keep a walkway clear or want pre-lit convenience.
Best natural-style unlit tree
4. Cox & Cox Bergen Spruce 7ft
The Bergen Spruce is for anyone who wants a classic, less uniform outline and prefers to add their own lights. Cox & Cox lists the exact 7ft unlit tree at 220cm total height by 140cm diameter, with three hinged sections and posable branches. It is the tallest pick here and sits between HOMCOM and Grandis Fir for stated width, so allow for both its height and spread. Cox & Cox does not specify the needle material; choose it for the shape shown in its undecorated photographs, not for an assumed PE mix.

Choose it if: you like a classic, less uniform outline and want to choose your own lights.
Skip it if: you need a narrow footprint, built-in lights or a tightly packed silhouette.
Best pencil footprint
5. Christow pencil spruce 7ft
If a normal 7ft tree would block the room, the Christow pencil keeps the 210cm height in a stated 55cm diameter—less than half the HOMCOM’s width. Its flexible, pre-attached PVC branches and clip-together plastic stand are straightforward to assemble, but the tips still need shaping. It is unlit and better suited to smaller baubles than a wide tree. Choose it for a narrow hallway or corner, not if you want a broad centrepiece.

Choose it if: height matters more than a wide classic silhouette, especially in a hallway or corner.
Skip it if: you want a broad centrepiece with lots of large baubles.
Best frosted look
6. Yukon Snow Pine 7ft
The Yukon is the decorative alternative if you want a snow-covered tree rather than another green spruce. Its listing gives 210cm height, approximately 125cm width, flocked PVC foliage and a folding metal stand. Wrapped branches need more arranging than the hinged green picks, and the seller warns that some flocking may fall while you shape it. It is unlit, so you can choose your own light colour; skip it if shedding or a snowy finish would bother you.

Choose it if: you want a frosted finish and are happy to add lights separately.
Skip it if: you want a clean green tree or dislike any flocking shedding.
Best with built-in lights
7. Christow pre-lit Nordmann Fir 7ft
Choose the Nordmann if you would rather have the lights already on the tree. Christow lists the 7ft model at 210cm high by 132cm wide, with mixed PE/PVC foliage and 350 LEDs that switch between warm white and multicolour. Hinged branches, a timer and a 5m lead add convenience compared with the six unlit picks. The trade-off is that the lighting is part of the tree: check the exact model’s connector and repair guidance before buying, and test each section during assembly.

Choose it if: you want to skip wrapping a separate light string each year.
Skip it if: you would rather be able to replace the whole light scheme independently.
Which one would we choose?
For a roomy living room and a traditional green display, the HOMCOM moulded-tip spruce is our starting point. The Grandis Fir is wider and more natural-looking in its mixed outer foliage, but its stated 150cm spread needs real floor space. The Bergen Spruce is the unlit Cox & Cox choice for a more open, natural-style outline; check its 140cm stated spread first. The Christow pencil is the sensible choice when you want 7ft height without losing a walkway. Choose the Nordmann if integrated lights matter more to you than a fully replaceable separate light string.
How to choose a 7ft artificial tree
Measure height and width separately
Seven feet converts to about 213cm, but these exact listings range from 210cm to 220cm. Measure from the floor to the lowest beam or light fitting, allow room for a topper, and confirm whether a retailer’s height includes the stand if space is tight. Mark the listed base width on the floor too. A 150cm spread and a 55cm pencil tree are completely different decorating decisions, even though both are called 7ft.
Decide where the tree will be seen
If it stands in the middle of a room, you will see every side. A tree against a wall may not need the same broad profile, but it still needs enough room to open and remain stable. Our slim-tree comparison has more narrow-footprint options.
Choose foliage and lighting separately
PE moulded tips can give better close-up needle detail; PVC can create a fuller inner tree. Neither label guarantees the finished look, so inspect an undecorated image of the exact height. Read our PE versus PVC guide if that terminology is new. Pre-lit saves time but ties the lights to the tree; the dedicated pre-lit comparison looks more closely at light settings and repairs.
Allow time for setup and storage
Hinges save you from matching loose branches, but every tree still needs shaping. Our hinged versus hook-on guide explains assembly, and the storage guide covers protecting branches and connections after Christmas. Consider the length of the disassembled sections if the tree needs to fit in a cupboard.
How we chose these trees
We compared current UK listings for exact 7ft variants, their stated footprints, foliage, lighting and branch systems. The shortlist deliberately covers different room and style decisions rather than ranking seven near-identical green trees. We checked the exact Amazon UK and Cox & Cox listings for specifications and availability on 14 October 2026. We have not assembled, measured or tested these trees ourselves. Prices are not shown because offers change and this page does not refresh live prices; check the retailer link for the current amount.
Choosing the right 7ft tree
Choose the space first, then the finish. A generous 7ft spruce can be wonderful in a larger room; a pencil tree can look just as considered when the floor plan is tight. Do not let the height label distract you from the stated branch spread, and check the exact retailer variant before buying.
Frequently asked questions
How tall is a 7ft artificial Christmas tree in centimetres?
Seven feet converts to about 213cm, but the exact trees in this guide are listed at 210cm, 219cm or 220cm. Check the model’s stated height and allow room for a topper; if clearance is tight, confirm with the seller whether the stand is included.
How much ceiling clearance does a 7ft tree need?
Measure to the lowest light fitting or beam, not just the ceiling. Leave space for the topper and for safe assembly; the exact amount depends on the topper and tree design.
Is a 7ft pencil tree as full as a standard 7ft tree?
No. A pencil tree keeps the height but has a much smaller base diameter. It can look lovely in a corner or hallway, but it will not give the same broad silhouette.
Are pre-lit 7ft trees worth it?
They save the job of wrapping lights and can offer an even display. Check the controls, connectors and repair options first, since lighting is built into the tree.
What is the difference between PE and PVC tree tips?
PE tips are moulded and can look more like real needles close up. PVC tips are flatter and often provide inner fullness. The whole-tree shape matters as much as the material label.
Can I use a 7ft artificial tree outdoors?
Only if the exact tree and any lights are explicitly rated for outdoor use. An outdoor-rated plug alone does not make an indoor tree suitable for outside.
As an Amazon Associate I earn from qualifying purchases.