How to Clean and Maintain a Dehumidifier

Share


Facebook


X


Pinterest


WhatsApp


Email


Copy Link

Illustration of a dehumidifier filter being removed for cleaning
Illustrative image. Follow the cleaning instructions for your own model.

When the dehumidifier has been running most days, it is easy to forget the water tank and filter need some attention too. A quick routine can keep dust and stale water from building up without turning cleaning into a big job.

This guide explains how to clean and maintain a dehumidifier safely, from emptying the tank to checking the filter and putting the machine away. The details vary between models, so keep your manual close for anything you remove or wash.

Before you clean

Switch the dehumidifier off and unplug it before removing the tank or filter. Let it finish any shutdown routine described in its manual first. Keep water away from the plug, cable and controls; do not spray the machine or open its electrical casing. EcoAir’s DC18/DC26 manual says to unplug before cleaning, while Meaco’s help centre says to wipe the exterior rather than spraying it.

Empty and clean the water tank

Empty the tank before it sits full for days. Slide it out as the manual shows, remove any lid that is meant to come off and wash the tank with warm water and a little mild washing-up liquid if your model allows it. EcoAir advises against hot water for its DC18/DC26 tank. Rinse away residue, wipe accessible surfaces and let the tank dry before refitting it. See EcoAir’s tank-care guidance.

If the tank has an awkward float or a fixed part, do not force it apart. Check the model’s manual for what may be removed. Water collected by a dehumidifier is not drinking water.

Check the air filter

Pull the filter out in the direction shown in the manual and clear loose dust. On many dust filters a vacuum cleaner with a soft brush is enough. Some can be washed, but others—including certain antibacterial filters—must stay dry. Meaco gives washable-dust-filter guidance for some models, while its Zambezi manual says to vacuum, not wash, that model’s filter. Do not wash a HEPA or charcoal insert unless its own instructions explicitly allow it.

Let a washable filter dry completely before it goes back. Check the manual’s cleaning interval: both Meaco and EcoAir give a two-week interval for some filters, but your model and a dusty room may call for a different routine. Replace a damaged or disposable filter as the manufacturer directs.

Wipe the case and check drainage

Wipe the outside with a soft cloth, lightly dampened only if the manual permits it, then dry it. Keep the air inlets and outlets clear without pushing anything through the grille. If you use continuous drainage, inspect the hose for kinks and check that it still runs to a suitable drain as the manufacturer instructs. Empty the tank and disconnect the hose according to the manual before moving the machine.

Before putting it away

Empty and clean the tank, clean the permitted filter and allow the removable parts to dry thoroughly. Store the unplugged machine in a dry place in the orientation its manual requires. EcoAir’s storage advice likewise stresses cleaning and drying first. Give it a quick check before its next season of use.

When cleaning is not enough

A full tank, blocked filter or misplaced tank can explain why a machine stops collecting water. A humidity target that has already been reached can also make a working machine pause. Check the display and manual before assuming it has failed. If the plug or cable is damaged, water has reached electrical parts, or an error persists after the manual’s checks, stop using it and contact the manufacturer or a qualified repairer. Do not open the sealed refrigeration system yourself.

If you are replacing an older machine, our dehumidifier buying guide explains tank access and filters. The best dehumidifiers comparison covers different room uses.

How we put this guide together

We compared manufacturer care instructions from Meaco and EcoAir. They show why a universal “wash the filter” step is unsafe advice. This is a guide to checking and caring for your own model, not hands-on testing or a substitute for its manual.

Frequently asked questions

How often should I clean a dehumidifier filter?

Check your model’s manual. Some manufacturers advise about every two weeks for a regularly used dust filter; dusty conditions may need more frequent attention.

Can I wash every dehumidifier filter?

No. Some dust filters are washable, while others and some HEPA or charcoal inserts are not. Follow the exact filter instructions and let any washable filter dry fully.

Should I empty the tank before storing the machine?

Yes. Empty and clean the tank, let removable parts dry, and follow the manufacturer’s storage directions.

Published: November 17, 2026


Join thousands of renovators getting great advice and inspiration right to their inbox

​

Sign Up

minimum password length is 6 characters
I have read the terms of use along with the privacy and cookies policies.

Are you a business? Learn more

Already have a Love Renovate account?

Log In

Are you a registered business with us? Sign in here


Don't have an account?

Reset Your Password